How to Set the Recording Resolution and Frame Rate on an Armor Pro DVR

From EZWatch Wiki

Setting up the Recording Resolution and Frame Rate:

Step 1: Press the MENU key on the Remote Control and input the Administrator Password.

Step 2: Press the DOWN ARROW key to highlight REC and press ENTER. This will bring up this menu:

Step 3: Highlight REC PROPERTY and press ENTER.

Step 4: Highlight the RESOLUTION field at the top of the screen and press ENTER. This allows you to select the desired resolution for the recorded video. Three options to choose from 720x480, 720x240, and 360x240. Use the Arrow keys on the Remote Control to hightlight the desired resolution and press ENTER to confirm the selection.

Step 5: Using the Arrow keys on the Remote Control, highlight the QUALITY for Camera 1 and press ENTER. This allows you to set the quality of the recorded video. Using the Arrow keys on the remote control highlight the desired quality and press the ENTER key to confirm the selection.

Step 6: Using the Arrow keys on the Remote Control highlight the FRAME RATE for CAMERA 1 and press ENTER. This allows you to set the desired Frame Rate for the recorded video. (Note: Frame Rate for recording is limited by the quality of the recording and number of cameras. 4-channel DVR's have a total of 120 frames per second to split between the 4 cameras. 16-channel DVR's have a total of 120 frames per second per to split between up to 16 cameras. Live viewing frame rates are different.)

Step 7: Repeat steps 5 and 6 for each camera you need to configure.

Step 8: Press MENU to exit the REC PROPERTY menu.