How to Set up Schedule Recording on an ArmorPro DVR

From EZWatch Wiki

Setting up Scheduled Recording:

Note: Cameras that have been configured for Motion Detection Recording CANNOT be setup for Scheduled Recording as the Scheduled Recording overrides the Motion Detection Recording.

Step 1: Press the MENU key and input the Administrator Password.

Step 2: Use the ARROW keys to highlight REC and press the ENTER key.

Step 3: Use the ARROW keys to select REC OPTIONS and press the ENTER key.

Step 4: Select Continuous Record and Press the ENTER key. Select ON and press the ENTER key to confirm the selection.

Step 5: Press the MENU key to return to the REC menu.

Step 6: Use the ARROW keys to select SCHEDULE REC and press the ENTER key. This will open a menu where you can select the camera to configure.

Step 7: Use the ARROW keys to highlight the camera you want to configure and press the ENTER key. This will open a menu where you can set the actual recording schedule. If you want all cameras to have the same schedule you can select ALL at this screen and set all the cameras up at the same time.

Step 8: Use the ARROW keys to highlight the HOUR you want the recording to START (Note: All times are Military with 0 being Midnight 12:00 AM going up to 23 which represents the 11pm - 12pm hour) and press the ENTER key to fill in the box. Fill in the box for each hour you want the camera to record. If you want the camera to record 24 hours a day fill in all the boxes. Repeat this for each day that you want the camera to record. To record 24 hours a day 7 days a week, fill in every box on the schedule, or select the boxes across the bottom of the menu to the right of ALL DAY

Step 9: Press the MENU key to return to the Camera Selection menu.

Step 10: Repeat steps 7 and 8 for each camera you want to configure.

Step 11: Press the MENU key to exit and return to the REC menu.

Step 12: This completes the Schedule Recording setup, press ENTER to return to the SETUP menu, press ENTER again to return to the LIVE CAMERA VIEW.