Setting up a Time-Lapse Recorder
From EZWatch Wiki
Contents |
Basic navigation of the Menus
Menu button enters the setup menu, navigates back from any sub-menu, and exits the setup menu.
Move/Tracking Down button selects the next option in the menu.
Select/Tracking Up button selects an item.
UP or Down buttons change values in the menu.
Language Selection
Step 1 - Press 'Menu' to enter the menu.
Step 2 - Press 'Move' to move down the menu to 'LANGUAGE.'
Step 3 - Press 'Select' to change the language.
Step 4 - Press 'Menu' when you are finished to exit.
Date/Time Setup
Step 1 - Press 'Menu' to enter the menu.
Step 2 - Press 'Select' to enter the 'VCR SET UP' sub-menu.
Step 3 - Press 'Select' to select 'CLOCK SET.'
Step 4 - Press 'Move' to select either date or time.
Step 5 - Press 'Select' to change time or date entry.
Step 6 - Use 'UP' or 'Down' to change values and 'Select' to select the next number or finish time/date setup.
Step 7 - Press 'Menu' when you are finished to exit the 'CLOCK SET UP' sub-menu.
Select Video Cassette type
Before beginning any recording you will need to select the type of Video Cassette you are using.
Step 1 - Press 'Menu' to enter the menu.
Step 2 - Press 'Select' to enter the 'VCR SET UP' sub-menu.
Step 3 - Press 'Move' to move down the menu to 'VHS-TAPE' and use the 'Select' button to chage the Video Cassette type (this should be listed on the outside of the Video Cassette box).
Step 4 - Press 'Menu' when you are finished to exit the 'VCR SET UP' sub-menu.
Begin Recording
To begin recording you can simply press the 'Record' button outside of the menu. The VCR will record with whatever the current settings are. You can press the 'UP' or 'Down' buttons to adjust the record mode. If you wish to set up a recording schedule see our article on Setting up a schedule on a Time-Lapse recorder.
Related Articles
